Megger Baker Test Equipment

BAKER ADX Static Motor Analyser

https://adx.megger.com/

The very latest in motor testing technology with Android operating system, built-in WI-FI™ & Bluetooth® with secure cloud based analysis software.

High voltage tests, Surge, Partial Discharge on Surge (with addition of PD option).

DC HiPot, DC Step-Voltage & DC Continuos Ramped.

DC Insulation Resistance (IR), Dielectric Absorption (DA), Polarisation Index (PA).

Low voltage tests, Winding Resistance, Inductance, Capacitance, Impedance, Phase Angle, D/Q (with addition of RLC option).

Test voltages from 4kV to 15kV, and up to 40kV coupled with Megger Baker PPX Power Pack.

Available with built-in armature test hardware (Model ADX 15A).

Test results and reports can be stored on the ADX, transferred to PC and shared remotely using PowerDB secure cloud-based analysis software.

BAKER AWA-IV Static Motor Analyser

Static Motor Analyzer | Baker AWA-IV (megger.com)

High voltage tests, Surge, IR, DAR, SV, Ramp & HiPot from 2kV up to 12kV.

Low resistance measurements from 1mΩ to 800Ω.

Available with built-in armature test hardware.

Test results can be stored on the AWA or transferred to PC for analysis & report generation.

BAKER DX Static Motor Analyser

Static Electric Motor Analyzer | Baker DX (megger.com)

High voltage tests, Surge, Surge PD, IR, DAR, SV, Ramp & HiPot from 2kV up to 15kV.

Winding resistance, Inductance, Capacitance, Impedance, RIC test, D/Q.

Available with built-in armature test hardware.

Test results can be stored on the DX or transferred to PC for analysis & reports with Surveyor DX software.

BAKER PPX Power Pack High Voltage Motor Tester

Static motor analyzer booster | Baker PPX Power Packs (megger.com)

For high voltage machines & large form-wound coils, the PPX series extends HiPot & Surge test voltages of the ADX, DX & AWA up to 40kV.

Models: PPX30 (30kV), PPX40 (40kV), PPX30A (30kV with armature testing capability).

BAKER ZTX Low-Impedance Coil Test Accessory

Extend the functionality of Baker DX & Baker AWA-IV analysers with the addition of the Baker ZTX to allow low-impedance testing of DC armature coils.

Includes the AFT5000 commutator test accessory.

Only compatible with 6kV+ DX & AWA-IV units.

MTR105 Rotating Machine Tester

Rotating machine tester | MTR105 (megger.com)

Full colour graphic display built to CAT III, IP54 & for use up to 3000 metres.

Adjustable iR from 10V up to 1kV & 200GΩ using: 3 Phase Spot, PI, DAR, IRt & Guard Terminal.

4 wire Low Resistance (uni & bidirectional measurements), LCR, Temperature, Motor rotation, diode test.

Voltage (measures ac 10mV up to 1000V; dc 0 to 1000V; TMRS), Frequency (15Hz to 400Hz), Phase rotation.

.

BAKER EXP4000 Dynamic Motor Analyser

Dynamic motor analyzer | Baker EXP4000 (megger.com)

A portable Dynamic Motor Analysis System.

Test Domains: Power quality, machine performance, current, spectrum, torque, variable-frequancy drives, continuous monitoring, tranient analysis (e.g. start-up), motor efficiency.

BAKER NetEP Online Motor Analysis System

On-line Motor Analysis System | Baker NetEP (megger.com)

Permanently installed onsite, fully automated machine system monitoring solution which evaluates each component of the electromechanical system & identifies electrical & environmental factors that will accelerate insulation degredation.

The system continuously aquires health & performance data on up to 32 electric motors & the rotating machine systems they operate.

BAKER WinAST Motor QC System

Automated Stator Testing System | Baker winAST (megger.com)

Fully automated, full-spectrum quality control testers for motor OEMs.

Built to each customers specifications using proven, reliable standard components in a cabinet style rack design and can be configured with a range of additional test capabilities to meet rigorous quality assurance standards.

Faetues a Windows-based application with an intuative, menu-driven user interface.  The system automates & controls tests, analysis & reports that are configured to specific customer requirements.

Unlike other volume manufacturing test approaches, this system does not require a master winding to perform routine production tests, nor does it need to set test voltages or pass/fail limits when production is switched to another motor model. 

BAKER WinTATS Traction Armature Testing System

Automated Stator Testing System | Baker winAST (megger.com)

AC & DC HiPot with micro-arc detection, surge, bar-to-bar & temperature-compensated resistance test capabilities.

User-programmable pass/fail limits.

Under 18 minutes to test as many as 200 armature bars once the system is programmed & set up.

Easy detection of weld faults i.e. poor connection between coils & commutator.

The system has a rack-syle cabinet, a computer running Windows 7, power supplies & measurement circuitry & includes an automatic armature indexing stand.

Semi-customised instrument assembled from standard components to customer specification.

ICMsystem

Digital PD detector with up to 10m parallel input channels. The instrument is completely controlled by software using a GPIB, USB, TCP/IP, GSM Modem, fibre optic or direct serial link.  It can be expanded to up to 10 true-parallel acquisition channels while offering all the features of the single-channel ICM system.  It is designed for acceptance tests on large power transformers and other applications requiring parallel acquisition.

ICMcompact

Stand-alone PD detectors are often used for quality assurance.  The ICMcompact can be equipped with circuits to perform PD location in power cables.  The spectrum analysis option offers a narrow and broadband PD measurement with selectable centre frequency.  this unit offers spectrum analysis up to 10MHz and a selectable bandwidth of 9kHz or 270kHZ.

AIAcompact

Portable unit for acoustic and electric (UHF) PD measurement on GIS, transformers and cable accessories.  The unit can be equipped with circuits for UHF measurements.

ICMflex

Based on the latest concept the entire acquisition hardware is placed on high voltage potential.  The instruments are fully controlled via high-speed Bluetooth™ or fibre optic communication. 

The ICMflex can also analyse Tan Delta.

ICMflex

As well as PD, the ICMflex has the option to add tan delta analysis using an unbalanced bridge formed by internal shunt capacitors, the reference capacitor and the device under test.  Here, the software shows tan delta, PF, capacitance, voltage and frequency.

TDAcompact

Loss factor meter.  The capacitance, tan delta and voltage are derived by digitally processing the currents of the test capacitor and a reference capacitor.